If a device is mounted fl ush with the wall, guide it into the housing by
applying even, slight pressure on the left and right (Figure 13) until the
>>
Push-to-open
<<
lock of the housing engages.
When pushing in the touch display into the housing, make sure that the
connected cables do not get wedged in.
Remove the protective foil from the user interface.
Switch on auxiliary voltage.
The device charges the operating system/Launcher and displays the
desktop interface/home page of the Launcher after a few seconds. Device is
ready for operation.
(23)
(22)
(22)
Figure 13 a/b: Flush wall mounting installation in the fl ush-mounted housing
(23)
Flush-mounted housing, fl ush-to-wall (not within scope of delivery)
z
23
Summary of Contents for 7574 01 07
Page 27: ...z 27...
