4.2 Commissioning
Downloading the physical address and application software
The physical address is always assigned for only one device. Only one device may be in
programming mode at any one time.
Application module is not plugged in. Programming button and LED are accessible.
o
Press the programming button (2).
The programming LED (1) lights up.
o
Assign physical address.
The programming LED goes out.
o
Downloading the user software.
i
Some application modules, e.g. push-button sensors, require that the application module is
plugged in before downloading. For details, see the corresponding instructions.
o
If present: plug in application module with frame. Do not damage the application interface.
5 Appendix
5.1 Technical data
KNX medium
TP 1
Commissioning mode
S mode
Rated voltage KNX
DC 21 ... 32 V SELV
Power consumption KNX
Order-No. 7504 00 01
max. 150 mW (with application module)
Order-No. 7504 00 03
max. 200 mW (with application module)
Application interface
Power output
Order-No. 7504 00 01
max. 100 mW
Order-No. 7504 00 03
max. 150 mW
Ambient conditions
Safety class
III
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
5.2 Warranty
We reserve the right to make technical and formal changes to the product in the interest of
technical progress.
Our products are under guarantee within the scope of the statutory provisions.
If you have a warranty claim, please contact the point of sale or ship the device postage free
with a description of the fault to the appropriate regional representative.
Berker GmbH & Co. KG
Klagebach 38
58579 Schalksmühle/Germany
T 49 (0) 2355/905-0
T 49 (0) 2355/905-111
www.berker.de
Seite 3/3
13.08.2010
82503021
97-09462-000
KNX
Bus coupling unit flush-mounted
