background image

Radio wall transmitter 1gang flat 

Order-No. : 2721 xx 

Radio wall transmitter 2gang flat 

Order-No. : 2722 xx 

Radio wall transmitter 4gang flat 

Order-No. : 2724 xx 

Operation- and
Assembly Instructions 

1 Safety instructions 

Electrical equipment may only be installed and fitted by electrically skilled persons. 

Failure to observe the instructions may cause damage to the device and result in fire and 
other hazards. 

Keep button cells out of reach of children! If button cells are swallowed, get medical help 
immediately. 

Risk of explosion! Do not throw batteries into fire. 

Risk of explosion! Do not recharge batteries. 

The radio communication takes place via a non-exclusively available transmission path, 
and is therefore not suitable for safety-related applications, such as emergency stop and 
emergency call. 

These instructions are an integral part of the product, and must remain with the end 
customer. 

2 Device components 

picture 1 

(1)  Base plate 
(2)  Frame 
(3)  Radio wall transmitter 
(4)  Fastening screw 
(5)  Labelling field 
(6)  Cover 

Seite 1/7 

Radio wall transmitter flat - 1gang, 2gang, 4gang 

82532711 
97-09322-000 

13.08.2010 

radio bus  

Summary of Contents for 2721 Series








Reviews: