Form #SPC04-0902N
© 2002 Berkel Company
Litho in U.S.A.
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Automatic Gravity Feed Slicer
Model 839A
Model 839A
Automatic Gravity Feed Slicer
Specifications
Motors:
Separate 1-speed, 1/2 HP, totally enclosed
motors for the knife and carriage, permanently
lubricated ball bearings, thermally protected.
Electrical:
Furnished in 115/60/1, 5.8 amp, AC,
ETL listed.
Carriage Speed:
52 slices per minute.
Finish/construction
: All food contact areas are
stainless steel or anodized aluminum including the
pusher, gauge plate, product table, center plate,
knife ring guard and one-piece base. Slicer disas-
sembles quickly without tools for easy cleaning.
Knife:
Nominal 14” (350 mm) diameter, hollow
ground, hardened and polished forged chromium-
plated carbon steel.
Cutting Capacity:
Carriage handles food up to 11”
(280 mm) wide by 8-1/2” (216 mm) high or 8-1/2”
(216 mm) diameter
Slice Thickness:
Precision system provides infinite
slice adjustment and consistent cuts of hard or soft
foods from tissue thin to 3/4” (19 mm).
Full Gravity Feed:
Full 45
°
angle feed with GPI
requres less mechanical pressure. Equipped with
a front-mounted, articulating, anodized aluminum
pusher and fence to hold product with less waste.
Knife Sharpener:
Built-in, top-mounted, two
stone, single lever, dual-action system for a lasting,
razor-sharp edge.
Knife Ring Guard:
Permanent, tapered guard
covers non-slicing portion of knife edge even when
the center plate is removed. The ring guard is
designed to provide added room behind the knife
for easy cleaning.
No-Volt Release:
Prevents activation of the slicer in
the event of a power interruption. Operator must
restart the slicer.
On/Off Switch:
Highly reliable, moisture resistant,
on/off switches and power indicator light.
Cord and Plug:
Attached 6-foot, flexible, 3-wire cord
and plug for grounded receptacle.
Warranty:
All parts, service and travel coverage for
one year, excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
Model No. Cutting Carriage Slice
Knife
Product Dimensions
Capacity Speed Thickness Diameter
Width A Depth B
Height C
839A
11” (280mm) wide 52 SPM to 3/4”
14”
25” 29”
29”
8-1/2” (216 mm) high
(19 mm) (350mm)
(635 mm) (737 mm)
(737 mm)
8-1/2” (216 mm) dia
Motor
Electrical Weight
Box Dimensions
Width
Depth
Height
1-speed
115/60/1 Net 138 lbs. (63 kg.)
34”
30”
37”
1/2 HP
Ship 170 lbs. (77 kg)
(864 mm)
(762 mm)
(940 mm)
A
B
C
