Model 839A
Automatic Gravity Feed Slicer
Standard Features
➤
Separate 1-speed, 1/2 HP, totally enclosed
and permanently lubricated motors for the knife
and carriage
➤
Furnished in 115/60/1, 5.8 amp, AC, ETL listed
➤
Carriage speed is 52 slices per minute
➤
Finish is stainless steel and sanitary anodized
aluminum; unit disassembles quickly without tools
for easy cleaning
➤
45
°
Product table with gauge plate interlock. Front
mounted, articulating pusher and fence
➤
Nominal 14” (350 mm) diameter; hollow ground,
hardened and polished forged chromium-plated
carbon steel knife
➤
Carriage handles food up to 11” (280 mm) wide, by
8-1/2” (216 mm) high or 8-1/2” (216 mm) diameter
➤
Precise slice adjustment to a thickness
of 3/4” (19 mm)
➤
Built-in, non-removable, top-mounted, two
stone knife sharpener with single lever, dual-
action system
➤
Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the center plate
is removed; ring guard design provides more room
behind the knife for easy cleaning
➤
No-Volt release prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer
➤
Positive, moisture protected, on/off switches and
power indicator light
➤
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Item #
Automatic Gravity Feed Slicer
Model 839A
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC04-0902N
Safety and Convenience Features
Berkel Model 839A automatic gravity feed slicer
features Berkel’s hollow ground chromium-plated,
carbon steel knife and built-in, single lever, dual-
action sharpener with convenient handle located on
the sharpener cover. The permanent, tapered guard
covers the non-slicing portion of the knife even when
the center plate is removed. The 45
°
table with gauge
plate interlock and front mounted, articulating pusher
and fence make product feed easier, creating more
consistent and uniform slices with less waste. The
single-speed carriage operates at 52 slices per minute.
The 1/2 HP motor, 14” knife and large product table
are ideal for handling oversize meats, cheeses and a
variety of other products. The 839A slicer is easy to
clean and disassembles quickly without tools.
Approved By:
Date
Model 839A
