- The appliance must be disconnected from the gas supply piping system during any pressure testing.
(Semasa ujian tekanan, alat ini mesti diasingkan dengan bekalan gas.)
- A separate gas supply shut off valve must be installed up-stream of the regulator in an accessible location.
(Satu lagi injap gas hendaklah dipasangkan di hujung atas regulator dan di tempat yang mudah sampai.)
- The gas service supply line must never be smaller than the appliance inlet line.
(Salur bekalan gas tidak boleh lebih kecil daripada salur masuk gas alat ini.)
INTER-CONVERSION OF LPG AND NG (SALING PENUKARAN LPG DENGAN NG)
LEAK TESTING (UJIAN KEBOCORAN)
- Never use an open flame for leak testing.
(Jangan gunakan api untuk ujian kebocoran gas.)
- Use soap solution on all leak test.
(Gunakan larutan sabun untuk semua ujian kebocoran gas.)
EXPLOSIVE DRAWING (GAMBARAJAH TERPERINCI)
(SM - Gas Salamanda / REV 01 / 2018 / 08)
2
Model
Gas Type
Injector of Pilot Burner
Orifice of Burner
1.9 mm Ø
SALA 22N
LPG
0.3 mm Ø
1.6 mm Ø
NG
0.5 mm Ø
2.4 mm Ø
(Model)
(Jenis Gas)
(Injektor Penunu Pilot)
(Saiz Mucung Penunu)
SALA 11N
LPG
0.3 mm Ø
1.2 mm Ø
NG
0.5 mm Ø
13
5
4
2
14
