1
2
3
4
5
Thread-lock
Adjust
Thread-lock
Adjust
Adjust on the engine
1. Remove the previous system.
2.Install the BERINGER cable clutch (see above instructi ons concerning the hydraulic master cylinder).
3. Connect the cable.
4. Adjust the clearance of the lever: respect the freedom of the cable when the lever is released.
Mounting instructions for rear �aster cylinder MC 12.7
This oscillati ng master cylinder is enti rely mounted with rod ends (aircraft quality).
1. Check pedal positi on of the boot must NOT touch the pedal.
2. If necessary, adjust the pedal positi on by screwing/unscrewing the ball end.
3. Block the locknut.
WARNING
Check that the pedal and the piston fully come back in the initi al positi on aft er pushing.
Are not covered by the 1 year guarantee
•
Uti lisati on for racing or any non-respect of the above-menti oned recommendati ons.
•
No respect of BERINGER’s instructi ons will cancel the guarantee.
•
The guarantee shall not cover normal wear, colour ageing, and chromed fi nish.
•
Any uti lisati on with another product that DOT4.
The best brake is the one properly adapted to the use you want.
We stay any ti me at your disposal for a specifi c or a race use. Contact us!
Beringer Brakes - 309 rue le Sou 69220 Saint Jean d’Ardières
Tél : +33 474 04 98 99 [email protected] www.beringer-brakes.com
Ca�le Clutch installation and utilisation
