Bergstrom NITE Plus, Install Manual, Page: 8 / 45

NITE Plus Installation Procedures
1-8
Freightliner Cascadia rev 10/7/2013
Prepare the Work Area
Set up your work light, clear the sleeper compartment of loose items, and
remove the divider curtain if there is one. Then remove the mattress and set
outside the cab. The
NITE Plus unit is going to be mounted under the lower
bunk in the central compartment.
Remove Left Divider Wall
Remove the left divider wall by
removing the screws at each
end. Set wall outside the truck.
Removal of this divider wall
will allow you to roll up the
floor mat from left to right.
1
2