Standing Ceramic Heater with Handle
H617
Instructions for Use
Please read and retain these instructions for future reference
v002: 16/06/21
The heater has an oscillation (swing)function of approximately 45°, which helps to provide uniform heating
or ventilation.
•
On the first 4 positions of the function control (turning clockwise), the appliance works with oscillation.
On the remaining 4positions, it works without oscillation.
•
To stop the swing while the appliance is oscillating, wait until the airflow is in the desired direction, then
turn the function control to [ 0 ] before selecting the relevant output function without oscillation.
CAUTION:
Never attempt to adjust the swivelling mechanism manually, as it could damage the heater.
Fan operation
The heater is equipped with a fan, which can be used to run the appliance without heat output.
•
Turn the function control to the fan
icon and the temperature control to the highest position [ + ] to
run the appliance as a fan only, without heat output.
Switching off
•
When you no longer need the heater, turn the function control to an OFF [ 0 ]position and the
temperature control to the minimum position [ - ].
•
Unplug the heater from the power source.
Safety features
Overheat protection
This heater is equipped with an automatic reset temperature control (overheat protection), which switches
the heater off automatically in the event of abnormal overheating. While this feature provides additional
safety in case of overheating, first and foremost you should make sure to eliminate all potential reasons that
can lead to overheating and create a fire risk.
•
If the overheat protection has been triggered, turn the function control to the[ 0 ] position and unplug
the heater from the wall outlet. Let the heater cool for about 10 minutes. Eliminate the cause of the
overheating (for example, excessive dust in the heater, or the air outlet is covered) and start it up again.
•
If after eliminating the cause you still cannot switch the heater back on, or if the overheat protection
circuit switches on without an apparent reason, contact your local store for advice.
Tilt protection (tip over switch)
The appliance is fitted with a tip over safety switch, which switches the heater off automatically if it is tilted
or tips over. This prevents hazards caused by overheating. Should this happen, place the heater upright
again, but take care as it may still be hot. The heater will turn on again automatically once it is back in an
upright position.
WARNING: Always place the appliance on a smooth, horizontal surface. Avoid carpets in order to prevent
failure of the safety switch.
Other Useful Information