Fan Heater
K035
Instructions for Use
Please read and retain these instructions for future reference
v001: 09/07/21
•
DO NOT LET THE POWER CABLE HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT
SURFACES.
•
USE ON A LEVEL, STABLE SURFACE.
•
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED FOR.
•
DO NOT PLACE UNDER OR NEAR FLAMMABLE MATERIALS SUCH AS CURTAINS, DRAPERIES, SHELVES,
LOOSE WALL PAPER, ETC.
•
ALLOW THE ITEM TO COOL THOROUGHLY BEFORE PUTTING ON OR TAKING OFF PARTS.
•
DO NOT PLACE THIS ITEM IMMEDIATELY BELOW A SOCKET-OUTLET.
•
KEEP ITEM AT LEAST 1M AWAY FROM COMBUSTIBLE MATERIAL SUCH AS FURNITURE, CUSHIONS,
BEDDING, PAPER, CLOTHES, CURTAINS ETC.
•
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE POWER CABLE, PLUG OR APPLIANCE, IN
WATER OR ANY OTHER LIQUID.
•
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
•
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED POWER CABLE OR PLUG OR AFTER THE APPLIANCE
MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND THAT THE POWER CABLE
IS NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU REGULARLY CHECK ITS CONDITION.
•
DO NOT LEAVE THIS APPLIANCE UNSUPERVISED WHILE IT IS ON. WHEN NOT BEING USED, ALWAYS
ENSURE THAT THE PRODUCT IS SECURELY IN THE 'OFF' POSITION (O) AND UNPLUGGED FROM THE
SOCKET.
•
DO NOT USE THIS HEATER IN THE IMMEDIATE SURROUNDINGS OF A BATH, A SHOWER OR A SWIMMING
POOL.
•
ANY REPAIRS MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN OR ELECTRICAL SERVICE AGENT.
USING THE HEATER:
1.
Before using this appliance, ensure that it is placed on a flat, stable surface.
2.
Check that the voltage corresponds to that of the power supply (220-240v ac mains socket). Once the
appliance is plugged in, turn the thermostat dial and the light will switch on.
3.
Turn the function setting switch from "I" to "II" to select your chosen temperature.
4.
The heater comprises a protection device protecting against overheating. If the fan heater overheats,
a temperature limiting system inside the appliance will automatically cut the power supply from the
heating element while the ventilator continues to function to cool the appliance. The appliance can re-
start as soon as the normal conditions and temperature needed for it to function are re-established.
Identify the causes of this overheating to avoid any recurrences.
1.
If the appliance is tilted, a safety system automatically cuts off the power, and the indicator will light
off. Put the appliance on a flat, stable surface and it will start operating again.
5.
When not using this heater, return the Button to the “0” and unplug.
CLEANING AND MAINTENANCE
1.
Always unplug the appliance and keep it away from any socket before cleaning.
To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly with a soft,
dry cloth before using again.
Do not use any cleaning or chemical products of any kind. Do not let water enter the openings on the
heater.
2.
When the appliance is not being used for prolonged periods, ensure that it is fully unplugged from the
socket and store in its packaging for simple storage and later use.
