14
SLIM FIT
EN
®
Position the unit on the seal, introducing the
interior distribution panel in the hatch gap.
Caution! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked by the EPDM
seal.
3
Hatch
Gasket
Gasket
Remove
Gasket
Gasket
Gasket
Cabin roof
Gasket
100 mm Approx. (protection paper)
15 mm
A
HOW TO CUT EPDM GASKET TO AVOID
WATER FILTRATION INTO THE CABIN
A-
Glue gasket, keeping 100 mm of protection
paper at each side.
B-
Remove the two pieces of paper.
C-
Glue by pressing both ends.
!
B
C
3
