Manual
| Instructions for the baby seat
en
RELEASE THE BELT:
To release the belt, press the
red button in the middle of the belt buckle. You can
now take your child out of the seat.
WARNING:
Pull on the straps until they lie flat and
touch your child‘s body. When you pull the strap
straight out, there should never be more than a
finger‘s width between the shoulder straps and your
child‘s body.
The webbing should be adjusted as
tightly as possible without causing
discomfort to the child. Slack webbing
is dangerous and it should be checked
every time the seat is used. To tighten
the belt, pull the belt down until it is
properly in place.
The webbing has two positions. The straps should either go into the slots at the
child‘s shoulder height or into the closest slots above shoulder height. To adjust the
strap, remove each strap by threading it through the slots from the front to the back
of the seat. Thread the straps through the correct slots again.
To loosen the belt, pull both belts while
pressing the belt adjustment button.
WRONG (TOO LOW)
WRONG (TOO HIGH)
CORRECT
39
