Page 5
Pic. 1.
Pic. 3.
Pic. 2.
1. Attach the spikes under the turntable, Pic. 1. and Pic. 2.
Setup Manual.
2. Place the turntable on the rack.
For an easy adjustment of the tonearm (Page 6), ensure free access to the 2 screws underneath the
turntable, holding the tonearm.
If not possible in the rack, then place the turntable on the edge of a table, Pic. 3.
3. Place airsupply indoor, on a horizontal plane. Ensure the airsupply is stable to avoid vibrations, which can
cause some noise.
Note>
If the airsupply is placed on a hard surface, it can reflect some noise. It is recommended to place the
airsupply on a soft surface (carpet).
Install the airtube, and connect one end to the airsupply and the other end to the turntable. Pic. 4 and 5.
Do not cause any pressure or squeezing to the airtube.
Note>
Both the airsupply and airtube must be placed indoor in normal livingroom environment, to minimize
condens.
Connect the powercord to the airsupply, and the powercord to the outlet.
Pic. 4.
Pic. 5.
air output
air input
