Operator stand / cab
Operating manual, Dumper – 3012 PLUS
97
- 131
28 April 2015
Bergmann Maschinenbau GmbH & Co. KG
9.6. Adjustment of driver seat
The driver seat of the Bergmann 3012 PLUS dumper can be adjusted vertically and horizontally. It can
also be adjusted to the weight of the driver. The seat is equipped with a safety belt (lap belt, see fig. 9-31
to 9-33). The seat settings (weight, etc.) must be adjusted before starting the dumper and each time a
new driver takes over the vehicle.
Do not place any objects in the oscillating range of the seat.
If there are any malfunctions or defects (loose screws, etc.) at the seat, have them eliminated by a
specialist technician.
To prevent accidents, ensure that all seat controls are fully engaged before the vehicle is started.
Do not make adjustments to the seat while the machine is in operation.
Changes to the series design of the driver seat (e.g. upgrading with third-party parts) might change its
functions and voids the test certificate. Certain functions of the driver seat might be impaired so that its
safety is no longer guaranteed.
All changes to the design and construction of the driver seat must therefore be approved by the
manufacturer.
The driver seat can be retrofitted with safety belts. All safety belts must be put on before starting the
vehicle.
When removing the upholstered backrest, only operate the backrest adjusting device, if the hard backrest
shell is held in position by hand. Otherwise, there is a risk of injury from impact of the hard shell.
