USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
12
3.
Product description
The DC20XX Dialog Controller is a control module with a display for the control and regulation of
automation and industrial processes in low-voltage installations in real time.
The ECC2100 Slim Box Controller has the same functions as the DC20XX Dialog Controller, but without the
display. The ECC2110 Slim Box Controller has in addition a 2
nd
CAN interface.
The programming tool CODESYS 3.5 (IEC 61131-3) from 3S-Smart Software Solutions is used for
programming the device.
The Ethernet terminals are specially configured for CODESYS visualisation and operation in machines and
systems. The terminals show the CODESYS Web visualisation or the CODESYS Target visualisation,
irrespective of whether the visualisation originates from a Berghof PLC control unit or some other
compatible CODESYS control unit.
DC20XX and ECC21XX Slim controllers can be connected using various different interfaces and have in
addition their own digital and analogue inputs / outputs.
On the devices with displays (DC20XX and ET20XX) the connection area for all external connections is
located at the rear. These devices are intended for installation on a flat surface in a pre-prepared installation
cut-out.
The connections to the ECC21XX Slim Box Controller are located on the front. This device is intended for
installation on a mounting rail in the control cabinet.
All connections are of the plug-in type.
