BERGHOF B-PRIMIS ET-PRO Series, User Handbook Manual

Page: 60 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx
60
12.
Appendix
12.1. Notes on copyright and the software licence
The device’s firmware contains free software. Parts of this software are available under the following
and other open source licences:
→
GNU General Public License (GPL)
→ GNU Lesser General Public License (LGPL)
→ Mozilla Public License (MPL)
→ FreeType License (FTL)
The source code for the free software can be requested from Berghof Customer Services at cost price
within three years of delivery of the device.
12.2. List of figures
Fig. 1: Overview of ET-Pro 4 (rear) ................................................................................................................ 14
Fig. 2: ET-Pro 7 (at the rear) .......................................................................................................................... 15
Fig. 3: ET-Pro 10/15 (rear) ............................................................................................................................. 16
Fig. 4: ET-Pro 4 dimensions ........................................................................................................................... 18
Fig. 5: ET-Pro 4 installation cut-out ................................................................................................................ 19
Fig. 6: ET-Pro 7 dimensions ........................................................................................................................... 20
Fig. 7: ET-Pro 7 installation cut-out ................................................................................................................ 21
Fig. 8: ET-Pro 10 dimensions ......................................................................................................................... 22
Fig. 9: ET-Pro 10 installation cut-out .............................................................................................................. 23
Fig. 10: ET-Pro 15 dimensions ....................................................................................................................... 24
Fig. 11: ET-Pro 15 installation cut-out ............................................................................................................ 25
Fig. 12: Opening the twist-lock catches .......................................................................................................... 26
Fig. 13: Installation in an installation cut-out, example with 4 fastening clips ................................................. 26
Fig. 14: Device clipped into place in the installation cut-out, example with 4 fastening clips .......................... 27
Fig. 15: Installing in the installation cut-out .................................................................................................... 28
Fig. 16: Hooking in the tensioning clamps (at the rear) .................................................................................. 29
Fig. 17: Tightening the tensioning clamps ...................................................................................................... 29
Fig. 18: Installing in the installation cut-out .................................................................................................... 30
Fig. 19: Hooking in the tensioning clamps (at the rear) .................................................................................. 30
Fig. 20: Tightening the tensioning clamps ...................................................................................................... 31
Fig. 21: ET-Pro 4/7 power supply plug X1 ...................................................................................................... 33
Fig. 22: ET-Pro 10/15 power supply plug X100 .............................................................................................. 34
Fig. 23: Block diagram of ET-Pro ................................................................................................................... 35
Fig. 24: Ethernet interface X4 ........................................................................................................................ 36
Fig. 25: USB interface X3 ............................................................................................................................... 37
Fig. 26: Startup page and network settings .................................................................................................... 39
Fig. 27: Info page ........................................................................................................................................... 39
Fig. 28: Device’s network settings .................................................................................................................. 40
Fig. 29: Setting the server IP .......................................................................................................................... 40
Fig. 30: Changing the Lifeguard settings ........................................................................................................ 40
Fig. 31: Network settings summary ................................................................................................................ 41
Fig. 32: Changing to Web Terminal mode ...................................................................................................... 41