berghaus MPB 1400, Operating Instructions Manual

Page: 7 / 20

T-junctions
Crossroads
1.) In the menu point >Choose<, use "1" or "3" to select the required type of
traffic control, e.g. "T-junction" (function as signal system for traffic
control at T-junctions).
2.) Press "4" to confirm your selection (e.g. T-junction) and thus go to the
next menu point. Use "1" and "3" to stipulate the corresponding red
phases as >RED 1< to >RED 3<.
>>>>>>
3.) Press "4" to confirm your selection and go to the next menu point
>Green 1<. Use "1" and "3" to adjust the required green phases.
Now proceed in the same way for >Green 2< and >Green 3<, pressing
"4" to confirm your inputs.
>>>>>>
This already completes all the inputs for traffic control at T-junctions: you can now
program the signals accordingly, as described on page 5!
1.) In the menu point >Choose<, use "1" or "3" to select the required type of
traffic control, e.g. "crossroads" (function as signal system for traffic
control at crossroads).
Now select the red and green phases as described above. This time, you have to enter
four values in each case for red (1 – 4) and for green (1 – 4).
This already completes all the inputs for traffic control at crossroads: you can now
program the signals accordingly, as described on page 4!
5
Choose < >
T-junct.
RED 1
= > 16 s
RED 3
= > 16 s
GREEN 1
= > 20 s
GREEN 3
= > 20 s
Choose < >
crossrds