6
UMJOG06-22LITUS
1. Push foot plate of Jogger
away from handle by pushing
curved crossbar up and out.
3. Flip Jogger to upright position
and clip lower belting around
frame to secure seat fabric.
2. Audible click will be
heard when Jogger frame is
completely unfolded.
2
3
Front Wheel Installation
4
Lay Jogger on its back with
handle and rear axle are
touching the floor.
5. Place red Safety Retainers
onto each side of the wheel axle
as shown, then slide the front-
wheel into the front-fork slots.
6c. Close the skewer
lever making sure that it
is flush with the tubing.
Be sure not to over
tighten.
1
6a. Install M5 bolt and washer
through fork into the threaded hole on
red Safety Retainer as shown. Repeat
on opposite side with second M5 bolt
and washer.
6b. Insert skewer through wheel and
install black skewer nut. Tighten by
turning the skewer lever.
5
5a
5b
5b
6c
6
(Unpack Jogger from Box and set wheels aside)
Note:
Check our YouTube channel for instructive and informative videos!
Assembly & Fitting
