Berger & Schroter 31884, Operating Instructions Manual, Page: 15 / 32

15
Using the wall bracket
You can mount the solar panel on a wall or tree by the supplied wall
bracket. Before mounting the wall bracket you should ensure that all
existing screws are tight.
Components
1.Tripod screw
2 Lock nut
3 Pivot bolts
4 Drill holes
5 Hexagonal screw
6 Wall plugs
7 Screws
Mounting the wall bracket
Required tools
• Drill
• 6 mm masonry/concrete drill bit
• Phillips head screwdriver
Caution
• Ensure that there are no electric lines, water or heating pipes installed
at the proposed drilling location.
• The supplied wall plugs are only suitable for mounting on
concrete or stone. Before starting the installation, please check your in-
stallation location carefully for its suitability for the plugs. The assembly
material used must be suitable for the respective location. If in doubt,
consult a professional.