INS #83
4 of 8
STEP 4:
Using the pre-installed bracket on the back of the housing (See Pic 5) and the pre-installed bracket on
the back of the cabinet (See Pic 6) connect the housing unit and the cabinet to the back unit (See Pic 7 & 8) using
2 x 3/4" wood screws for each bracket.
Pic 5 Pic 6
Pic 7
Pic 8
STEP 5
: ASSEMBLING THE TOP BED FRAME- Using 8 x 2-1/2” bolts and 8 x barrel nuts, assemble the top bed.
Insert the barrel nuts to the side rail first and test it. See Pics 9 & 10--Make sure it forms a rectangle before
tightening the bolts. (Pics 11 & 12) The footboard with the cut-out will face the stairs (in this case we show it on
the left side).
Pic 9 Pic 10
Pic 11
Pic 12
ATTACHING THE BED FRAME TO THE BASE UNITS
STEP 6:
Carefully lift the frame and nest it on the base units. See Pic 13. Make sure the front footboard is
positioned properly on the chest. See Pic 14
Pic 13
Pic 14
Detail of the Bracket
for the Housing.
Detail of the Bracket for
the 3 Drawer Cabinet.
Connecting the
Housing to the Back
Unit
Connecting the 3 Drawer 1
Door Cabinet to the Back
Unit
