EXCLUSIVE GREEN HE C.S.I. - R.S.I.
12
4
7
+4/5˚C
+3˚C
+2˚C
+1˚C
0˚C
-
1˚C
-
2˚C
-
3˚C
-
4/5˚C
Adjusting domestic hot water temperature
To adjust domestic hot water temperature, turn switch
D
(&IG. 9) CLOCKWISE
to increase and anticlockwise to decrease. The bar segments light up
3
—#) AS THE TEMPERATURE IS INCREASED.
The selected temperature value appears on the display.
7HEN CHOOSING THE TEMPERATURE, BOTH FOR HEATING AND DOMESTIC HOT WATER, THE
display shows the value being selected
.
About 4 seconds after the selection
has been made, the modification is memorised and the display returns to
the delivery temperature read by the probe
.
Working the boiler
Adjust the ambient thermostat to the required temperature (approx. 2o
—
#). If there is a demand for heating water, the boiler starts and the symbol
is shown on the display (&IG. 1o). The boiler will remain working until the
set temperatures are reached, after which it will go on stand-by
.
In the
event of ignition or operating faults, the boiler will perform a “safety stop
The flame symbol will go out and the fault code and will be displayed
(&IG. 11). &OR A DESCRIPTION OF FAULTS AND HOW TO RESET THEM, CONSULT CHAPTER
“Troubleshooting”.
6
2
A
3
5
1
OPEN POSITION
10
