Beretta BV 120, Instructions For The Installer, Page: 7 / 20

BV BOILER CONTROL PANEL ACCESSORY
These instructions are an integral part of the handbook for the equipment on which the accessory is
installed. See that handbook for WARNINGS and SAFETY RULES.
1 DESCRIPTION OF THE ACCESSORY
The control panel is used to operate BV 120 and BV 160 boilers as regards switching on, switching off and setting the hot water
temperature. It must be used when it is not possible to operate the boiler directly from the control panel on the hot water unit it is
connected with.
Their principal characteristics include:
- Off switch.
- Summer / Winder (E/I) selector switch.
- Temperature setting thermostat 0-90°C
- Thermometer
To use the control panel with basement boilers, the electric boiler completion accessory is required.
2 RECEIVING THE PRODUCT
The control panel is supplied in a single pack, protected
by a plastic bag and specific cardboard packing.
The packing includes the following material:
- Control panel
- Instruction manual.
3 Technical data
DESCRIPTION BV 120 BV 160
Control panel diameter 380 mm
Control panel height 85 mm
Boiler height with control panel 808 1008 mm
Working temperature range 0 - 90 °C
Net weight 1,1 kg
Electrical protection level IP 21