20
CHROMOPHARE® D 650plus, D 530plus, D 500plus, D 650, D 530, D 500 Service Manual (E)
3.4 Systemvarianten
The CHROMOPHARE® generation D is available in the following system variants:
1. CHROMOPHARE® D 650plus as a single light
2. CHROMOPHARE® D 650plus as a double and a triple light
3. CHROMOPHARE® D 650plus as a combination light with D 530plus
4. CHROMOPHARE® D 650plus as a combination light with D 500plus
5. CHROMOPHARE® D 530plus as a single light
6. CHROMOPHARE® D 530plus as a double and a triple light
7. CHROMOPHARE® D 500plus as a single light
8. CHROMOPHARE® D 500plus as a double light
3.5 Options
The CHROMOPHARE® generation D can be supplemented or upgraded with the following options:
• Light carrier arm for up to 15 kg load with AC and PA connections for an auxiliary device for example. (Only
possible if the light has been prepared for an additional arm in advance)
• Supply carrier arm for up to 25 kg load with AC and PA connections, prepared for gas supply. This option must
be ordered with the lighting system (not upgradeable).
• Wall control unit for installation into a wall indicator panel. Functions such as switching on/off and brightness
of the OP light can then be controlled from the wall. (not upgradeable).
• EndoLite® - an environment illumination f0r MIS-surgeries, a 20 Watts halogen bulb integrated in the light
head, activated when the main light is switched off.
3.6 Instructions for changing lamps
The halogen bulb has an average life of 1000 hours. In the event of failure of the main lamp, switch over to a re-
serve lamp occurs automatically and the reserve lamp swivels automatically into the former position of the main
lamp.
A red indicator lights up on the lamp housing when the lamp safety system has switched over to the reserve lamp.
The defective main lamp should then be exchanged as quickly as possible.
The bulbs must be replaced in the following manner:
The symbol with the meaning ‘Danger - Risk of Burning’ is placed on the lamp sup-
port.