background image

18

Cleaning

6005437_a – 30.05.2022

 

D

CAUTION!

Danger of injuries due to device edges!

When removing and replacing the lower section or the 
Capillar Trap, fingers may become trapped and crushed.

 

Move the device parts slowly and carefully. 

 

D

ATTENTION!

Danger of damage due to falling parts!

The lower section and the Capillar Trap can fall down when 
being removed and damage the hob, the kitchen units or 
other objects.

 

Hold the parts tightly when removing.

 

Protect the area below the device (e.g. using thick 
cardboard).

Lower section

The lower section is held in the device by magnets.

 

Slowly guide the flap with the lower section down to the 
stop.

 

Take hold of the lower section at the sides with both 
hands.

 

Turn the lower section until it has released.

 

Pull the lower section off.

 

Clean the upper section with a soft, moist cloth.

 

Clean the lower section with a soft, moist cloth or in a 
dishwasher.

 

Dry the upper and lower sections with a soft cloth.

 

Place the lower section centrally on the mounting.

 

Turn the lower section until it is held by the magnets.

 

Push the lower section upwards until the magnetic 
fasteners can be heard to click into place.

 

Ensure that the lower section is securely mounted.

Capillar Trap

The Capillar Trap is inserted in the device over the lower 
section, and is held in the device by magnets.

 

Take hold of the Capillar Trap on its sides with both hands.

 

Turn the Capillar Trap.

 

Pull the Capillar Trap down and off.

 

Clean the Capillar Trap e.g. in a dishwasher.

 

Clean the surfaces and edges on the recess for the 
Capillar Trap with a soft, moist cloth.

 

Make sure that the Capillar Trap is completely dry.

 

Place the Capillar Trap in the device from below.

 

Turn the Capillar Trap until it is held by the magnets.

 

Make sure that the Capillar Trap is securely mounted.

Summary of Contents for Skyline Round BIH 60 SKR





























Reviews: