27
Cleaning
6004067_a – 01.08.2018
EN
Upper section, bulging edge and lower section
The front trim is magnetically held in the device. The upper
section, the bulging edge and the lower section lie in the
front trim.
☞
Drive the device at least halfway out. The front trim must
be driven out fully.
☞
Fold the front panel down.
☞
Pull the lower section out forwards with both hands.
☞
Pull the bulging edge from the upper section.
☞
Clean the upper section with a soft, moist cloth.
☞
Clean the bulging edge and the lower section with a soft,
moist cloth or in a dishwasher.
☞
Dry the upper section, the bulging edge and the lower
section with a soft cloth.
☞
Take hold of the lower section with both hands, the drip
bowl points upwards.
☞
Insert the lower section into the device until it reaches
the rear stop.
☞
Place the bulging edge onto the upper section.
☞
Check whether the bulging edge is correctly placed and
held by the magnets.
☞
Close the front panel until the two magnetic fasteners can
be heard to click into place.
Capillar Trap
The two Capillar Traps are inserted and held magnetically in
place in the device.
In order to remove the Capillar Traps:
y
The device must be driven at least halfway out.
y
The front trim must be opened.
☞
Pull the Capillar Trap downwards by the handle, out of the
magnetic fasteners.
☞
Draw the Capillar Trap forwards and out of the device.
☞
Clean the Capillar Trap e.g. in a dishwasher.
☞
Clean the upper section with a soft, moist cloth.
☞
Make sure that the Capillar Trap is completely dry.
☞
Prior to insertion, align Capillar Trap such the label “Down”
points downwards.
☞
Insert the Capillar Trap such that it is held in the device by
the magnetic fasteners.
After cleaning, the interior parts should be reinserted.
Summary of Contents for Moveline BTH 100 ML
Page 35: ...35 6004067_a 01 08 2018 EN ...
Page 36: ...6004067_a 01 08 2018 ...
