15
Installation
6004347_0 – 27.09.2018
EN
3.5.6
Fit chimney side parts
D
ATTENTION!
Danger of damage through improper handling!
The body of the hood and the chimney could be damaged
by movements during the installation.
☞
Keep a distance between the chimney and the body of
the hood.
☞
Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
The chimney consists of two side parts and the front panel.
The side parts are fitted in this step. Inserting the front panel
only takes place after fitting the filter and after connecting
the exhaust air ducting.
☞
Bend the metal plates on the side parts, so that a
90° angle results.
☞
Insert the side parts such that the holes on the underside
fit over the screwed end on the hood body.
☞
Make sure that the fastening holes in the side parts are
flush with the threaded holes in the wall brackets.
☞
Screw the side parts onto the wall bracket.
☞
Tighten the screws for the wall fastening of the wall
bracket. If necessary, the position can be adjusted via
slotted holes.
Summary of Contents for Emotionline BWH 120 EL
Page 34: ...34 6004347_0 27 09 2018 ...
Page 35: ...35 6004347_0 27 09 2018 ...
Page 36: ...6004347_0 27 09 2018 ...
