Berbel BIH 100 GL, Operating And Installation Instructions

Page: 14 / 36

14
Installation
6005735_0 – 31.03.2021
3.5.4 Hanging the chimney stack
D WARNING!
Danger of injuries through improper handling!
Hanging the device requires a great deal of physical exertion
due to its size and weight. If the device falls down, serious
injuries are possible.
☞
Two persons are required to hang the device.
☞
Ensure stable footing when hanging the device.
☞
Ensure that no other people are in the working area.
D ATTENTION!
Danger of property damage through improper handling!
Hanging the device requires a great deal of physical exertion
due to its size and weight. If the device falls, the device,
kitchen furnishings and other objects could be damaged.
☞
Cover the cooled hob.
☞
Keep the installation area clear.
☞
Arrange the chimney stack with the front side facing the
front side of the cooking surface.
☞
Lift the chimney stack.
☞
Attach the chimney stack to the ceiling with the bolt
anchors.
☞
Twist the chimney stack so that it is held in the position of
the two lock holes by the nuts.
☞
Make sure that the chimney stack is held in this position.
☞
Align the front side of the chimney stack parallel to the
front side of the cooking surface.
☞
Firmly tighten the nuts at the lock holes.
☞
Screw the nuts and washers onto both bolt anchors and
firmly tighten the nuts.
☞
Ensure that all nuts are fully tightened.
☞
Remove the cover from the cable compartment on the
chimney stack.
The hood body cables are secured for transport.
☞
Remove the transport protection from the cable before
attachment.