53
Product information
6004941_0 – 29.08.2019
EN
2.
Product information
2.1
Product overview
The device expands the equipment options for the extractor
hood.
Observe the extractor hood instructions.
A
C
D
F
E
B
A Cover grille
B Adapter frame (if necessary)
C Base housing
D Filter flap
E Recirculated air filter BUF GU
F Tube element (if necessary)
2.2
Installation variants and installation dimensions
The device is suitable for two installation variants:
y
Variant A - installation in wall-mounted cabinets with
hinged doors.
y
Variant B - installation in wall-mounted cabinets with front
lifting fitting.
Dimensions for installation in wall cabinets:
y
Width (inside cabinet) at least device width + 1 mm.
y
Depth (cabinet body) min. 300 mm.
y
Height (lower edge of cabinet to lower edge of cover grille):
y
Variant A min. 500 mm, max. 940 mm.
y
Variant B min. 560 mm, max. 1000 mm.
y
Side wall thickness 16 - 19 mm.
y
If a niche back panel is used, it is necessary to consider
the thickness of the niche back panel.
y
If a spice rack is installed, it is necessary to consider the
installation depth of the device.
y
A distance of 100 mm must be retained between the
cover grille and ceiling for the ventilation outlet.
y
The rear edge of the device must be installed flush with
the rear edge of the cabinet.
2.2.1
Variant A - installation in wall-mounted
cabinets with hinged doors
500 - 940
54
211
481
≥ 300
600/900
1
2
3
P
175
2.2.2
Variant B - installation in wall-mounted
cabinets with front lifting fitting
560 - 1000
54
211
481
≥ 300
600/900
1
2
3
P
235
Summary of Contents for BGU 125
Page 62: ...62 6004941_0 29 08 2019 ...
Page 63: ...63 6004941_0 29 08 2019 ...
Page 64: ...6004941_0 29 08 2019 ...
