Berbel BGU 125, Installation Instructions Manual

Page: 55 / 64

55
Installation
6004941_0 – 29.08.2019
EN
3. Installation
3.1 Safety instructions for installation
D WARNING!
Hazard through disregard of the installation instructions!
This chapter contains important information for the safe
installation of the device.
☞
Read through this chapter carefully before installing the
device.
☞
Follow the safety instructions.
☞
Carry out the installation as described.
y Installation only by qualified specialist personnel.
D
“1.2 Authorised target groups” (page 52).
y Electrical work must only be undertaken by qualified
electricians.
D
“1.2 Authorised target groups” (page 52).
y When working at heights, ensure good stable footing
(e.g. stable stepladder).
y The hob and other parts that can be touched must be
allowed to cool prior to installation.
y Store the film or other parts of the packaging in a location
which is inaccessible to children.
y The device must be in an undamaged and fault-free
condition prior to installation.
y Cables must not be kinked, crushed or damaged.
y The power supply voltage must match the voltage
information quoted on the ratings plate.
D
“2.4 Technical data” (page 54).
y Ensure that the power supply is stable and remains so
prior to the installation.
Connect the power supply only when instructed to do so
in the installation instructions.
3.2 Requirements for the installation location
y
The recirculated air filter must be accessible at all times in
order to change the filter filling. The spice rack must be
detachable.
☞
A distance of 100 mm must be retained between the
cover grille and ceiling for the ventilation outlet.
3.3 Assembly steps
Short overview:
1. Preparation for installation
2. Unpack the device
3. Install the device
3.3.1 Preparation for installation
☞
Familiarise yourself with the installation situation and the
associated documents:
y Device and instructions
y Extractor hood instructions
☞
Assemble the tools and materials required:
y Stable stepladder
y Folding rule or measuring tape
y Saw for cutting the cabinet cut-out
y Saw for shortening the tube element
y Phillips head screwdriver, size 2
y Protective material (e.g. thick cardboard) for the hob
and the worktops
☞
Ensure that the extractor hood is installed professionally.
☞
Keep the installation area free of objects that could be in
the way or that could be damaged.
☞
Make sure that the hob and other parts that could be
touched have cooled down.
☞
Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).
☞
Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
3.3.2 Unpack the device
D ATTENTION!
Danger of damage due to improper handling!
The device can be damaged when being unpacked or
transported.
☞
Do not cut into the protective cardboard packaging.
☞
Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
☞
Unpack the device and all accompanying parts carefully.
☞
Set the device down on a firm, clean and protective
surface (e.g. thick cardboard).
☞
Check the device and its constituent parts for damage.
☞
Check the delivery is complete.
D
“2.4 Technical data” (page 54).
If parts are missing or damaged:
☞
Please consult your dealer or customer services.
☞
Remove the packaging material.
D
“5.1 Dispose of packaging” (page 60).