Fan heater Use instructions
8
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Product description Fig. A
1. Handle for transportation
2. Ambient thermostat
3. Function selector
4. Functioning indicator
Operation and use
Operation knobs
0 Off (OFF)
Ventilation only (room temperature air)
I Minimum Heat Level (1000W)
II Maximum heat level (2000W)
Operation
Put the plug into an appropriate socket.
Turn the function selector to the desired function.
Thermostat
Turn the thermostat knob clockwise to increase the air emission (temperature) and to start the heating or the fan.
The operating lamp lights up.
Turn the knob counterclockwise to decrease the temperature or turn off the heating or fan.
Heating function
Select “I” in the function selector to obtain the minimum heat level (1000 Watts). Select “II” to get the maximum
heat level that can be set (2000 Watts).
Turn clockwise the thermostat knob to adjust the heat.
To reach the maximum heating level, select “2” and turn the thermostat knob clockwise.
Ventilation function
Place the function selector on
The Fan heater will emit fresh air.
Adjust the thermostat clockwise until the fan starts; the operating lamp lights up.
To switch off, position the function selector to the “0” position and rotate the thermostat counterclockwise; the
operating lamp switches off.
Use the handle to carry or move the fan heater.
Maintenance and cleaning
There are no maintenance items inside the stove.
