6
7
EN
Description of product Fig. A
1. Charging indicator
2. USB interface
3. Speed indicator
4. ON/speed key
Operation
The item can be used both in rechargeable mode and connected to the mains
supply.
To charge the item, connect it to any device fitted with a USB port (laptop, PC,
power bank, etc.), or to a wall socket, through USB adapter (not included).
Once the item is connected, the charge indicator found next to the USB port
will turn red, and will then turn green once the battery is fully charged (approx.
3 hours).
During charging, it is possible to continue operate the item, without interruption.
Note: it is advisable to completely charge the item every two-three months,
to avoid any battery damage.
To activate the fan, press the ON/speed key; the fan will start running at low
speed. Press the key twice for medium speed, and three times for high speed.
The speed indicators on the back will turn on based on the selected speed.
The fan head can be rotated by 360° up or down, and right or left.
To turn the fan off, press the ON/speed key four times.
Cleaning and maintenance
Make sure that the product is off and/or unplugged from wall socket, before pro-
ceeding with cleaning.
Use a soft, slightly damp cloth to clean the outer surface of the item.
Warning: do not submerge the fan in water or other liquids.
Technical data
Power: 5-10W
Working voltage: 5V DC – 1.8A
Lithium battery pack 2000 mAh
For any improvement reasons, beper reserves the right to modify or impro-
ve the product without any notice.
