Beper 90.321, Use Instructions

Page: 9 / 28

ENGLISH
Hand blender Use instructions
9
DANGER
Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Only
use a moist cloth to clean the motor unit.
WARNING
Check if the voltage indicated on the appliance corresponds to the local mains voltage before you
connect the appliance.
Do not use the appliance if the mains cord, the plug or other parts are damaged.
If the mains cord is damaged, you must have it replaced by Beper, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
Never let the appliance run unattended.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.
If the blades get stuck, unplug the appliance before you remove the ingredients that block the bla-
des.
CAUTION
Switch off the appliance and disconnect it from the mains before you change accessories or appro-
ach parts that move during use.
This appliance is intended for household use only.
Do not exceed the quantities and processing times indicated in the table.
Do not operate the hand blender for more than 60 seconds at a time when you blend or chop heavy
loads. After these 60 seconds, let the appliance cool down sufficiently before you continue. None of
the recipes in this user manual constitute heavy loads.