Set of 3 candles Use instructions
6
1. Open battery compartment on the bottom of each candle.
2. Insert 2 x AAA batteries into each candle. Do not mix different battery kinds.
3. Close the battery compartment door and slide to switch to “ON” position.
4. Remove the battery saver tab from the remote control and use the remote control to operate the
flameless candles.
ON - Press this button to turn on candle light.
OFF - Press this button to turn off candle light
TIMER - Press 4H button to set 4-hour timer and 8H button to set 8-hour timer. The timer is auto-
off only timer. The flameless candles turn on for 4 or 8 hours and then turn off automatically. The
candle lights WILL NOT turn on automatically on the second day and you need to use the remote
control to turn on them.
MODE – Switch between flickering light and steady light mode.
Multi Color – Press this button to let the candle light change colors automatically. Press this button
again to stop at the current color.
12 Color Buttons – Choose your favorite color on the remote control, press the button and the color
of light will change to the same accordingly.
Note:
● Candles are designed for indoor use only.
● Each candle can be controlled individually using the remote control if the candles are not placed
in cluster. Simply point the remote control at the candle and choose your setting.
● There is a small battery drain during the standby (when you press the OFF button on the remote
control to turn off the candle light). If you do not use the flameless candle regularly, please slide the
switch (on the bottom of the each candle) to “OFF” position to save batteries.
Technical data
Candle: 2xAAA (not included)
Remote control: 1xCR2025 (included)
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
