![background image](http://html1.mh-extra.com/html/beper/70-410/70-410_use-instructions_2736080013.webp)
13
Humidifiers with aroma oil box Use instructions
Descaling the humidifier
Disconnect the humidifier from the mains and set the on/off knob to ‘off’.
Fill the water basin with 100ml of vinegar (4% acetic acid) per 200ml of water).
Leave the water and vinegar in the water basin for at least 4 hours (preferably overnight).
Empty the water basin and remove the scale with a soft cloth.
Put some white vinegar (4% acetic acid) on the steam generator and then wipe away the
vinegar with a moist cloth.
Rinse all parts with clean water.
TROUBLESHOOTING
If problems arise with the appliance and you are unable to solve them with
the information below, please contact Beper service centre.
MALFUNCTION
REASONS
RESOLVE METHODS
Power indicator can’t work and
with no wind and mist
Didn’t connect the power
supply
Didn’t turn on the humidifier
Connect the humidifier from
the power supply
Switch on the unit
Power indicator illuminate, the
unit with wind but no mist
No water in the water tank
Fill water in water tank
Smelly mist
New humidifier
Dirty water or long-time to
store water in water tank
Open water tank, put it in
shadow for 12 hours.
Clean the water tank, fill clean
water in.
Power indicator illuminate, the
unit with no wind and mist
Too much water in the base
flume
Empty the flume, then close
the cap of water tank.
Little mist comes out of the
nozzle
Dirty Heater element
Clean the Heater element
Abnormal noise
Caused by little water in water
tank.
Resonance from table-board
Fill water in water tank.
Place on a stable level sur-
face.