Beper 70.210, Use Instruction, Page: 16 / 40

16
Mist Fan Use instructions
PROBLEMS
PROBLEMS REASON SOLUTION
The fan does not work when
it’s started
The plug is not correctly inser-
ted into the socket.The switch
is ON
Plug the supply cordPress the
switch ON
The fan does not swing but has
wind
The SWING light is OFF Press the SWING button
Indicator light is not working
and the fan does not work
The plug is not correctly inser-
ted into the socket. The switch
is not ON
Press switch ON
The spray water does not
work
There is no water in the water
tank. The cover tank is not
well closed
Fill the water in water tank
Tighten the cover tank
The spray water is smelly New product.Water has not
been changed for a long time
Open the water tank for 12
hours in a cool place Clean
the water tank and change the
water
Indicator light illuminate, but
no windNo mist
Too much water in the water
tank
Decrease some water and
tighten the cover
The spray mist is very small Transducer is clogged with dirt
Dirty water or water has been
too long in the water tank
Clean the transducer Add
clean water
TECHNICAL DATA
Coverage area : 20 m²
Power : 75W
Power supply . 220V ~ 50Hz
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
For any improvement reasons, Beper reser-
ves the right to modify or improve the product
without any notice.