Beper 50.245, Manual

Page: 10 / 68

10
It is advisable to make a test by passing the lint remover into invisible parts
of the garment.
Gently wipe the lint remover on the surface of the garments one or more
times until completely smoothed.
If the fabric is very light, it is advisable to fold it into two parts before remo-
ving the lint.
Note: It is advisable to pass the lint remover on the fabrics by fol-
lowing the weave of the fabric itself.
Cleaning (fig. A-B-C)
Before cleaning the lint remover make sure it is turned off and unplugged.
Remove the protector lid by pulling it to the top.
Remove the plastic ring by turning anti-clockwise (FIG.A)
Remove the metal ring by turning anti-clockwise (FIG.B)
Use the equipped cleaning brush to clean the lint removed (FIG.C)
Warning: it is recommended not to touch the blades because you
could be injured.
At the end assemble the components again following steps 2 and 1
in reverse order, making sure to rotate clockwise.
Attention: the product is equipped with a safety system that will
not let operate the product if the components will not be positioned
correctly.