![background image](http://html1.mh-extra.com/html/beper/40-742/40-742_use-instructions_2736037010.webp)
10in1 grooming set for face, hair and body Use Instructions
10
To use the trimmer, insert the guiding comb on the blade and proceed as detailed in the previous paragraph.
Note: make sure that the appliance is turned off and unplugged from the wall socket before inserting the
guiding comb on to the blade.
Precision trimmer
This head is used for maximum precision trimming of hair and beard.
Nose/ear trimmer
This accessory is used for nose and ears; by simply and carefully introducing the trimmer into nostrils and ear
holes, this accessory allows to quickly trim and/or remove unwanted hair from these areas.
Note: do not insert the trimmer too deeply into nostrils and ear holes, to avoid any damage and injury.
Shaver head
This head is used as a classic shaver, to mainly shave face and neck.
It is better to clean and dry your skin before shaving.
For best result, keep the appliance at a 45° angle, gently leaning the head on your skin, to limit any possible
rash or redness.
Note: to remove heads, make sure not to pull the blades, in order not to damage them and to avoid any
risk of injury.
Mounting the cutting heads
Make sure that the appliance is turned off and unplugged from the wall socket.
Choose the desired head, and insert it on the appliance, making sure that all the connection parts fit snugly.
Make sure that the head is firmly fixed to the body of the appliance (there should be no space between the head
and the appliance, and the head must be well fixed and stable).
Removing the cutting heads
With the appliance switched off and unplugged from the wall socket, to remove the cutting head gently press on
the back of the head, placing your thumb on the small recess found right below the blade.
To remove the nose/ear trimmer, gently press the front part of this accessory until it is removed from the body
of the hair clipper.
Cleansing and maintenance
Before cleaning the appliance, make sure that it is switched off and unplugged from the wall socket.
Remove all the accessories, and remove hair from the blade using the small brush included in the set.
Do not place the appliance into water. Use a soft and damp cloth to clean the body of the hair trimmer.
After cleansing, lubricate the blades by pouring 2 drops of oil from the small bottle included in the set.
Technical data
Rechargeable lithium battery 3,7V – 600mAh
Adaptor: input 100-240 V / 50-60 Hz; output 5V – 1000 mA
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.