![background image](http://html1.mh-extra.com/html/beper/2018-132/2018-132_use-instructions_2736342019.webp)
EN
19
5. After the device has shut off, press and hold the ON/
OFF switch again until the new scale appears.
6. Release the ON/OFF switch and wait 1 second, the
unit is now ready for a new measurement in the selected
scale.
CARE AND CLEANSING
1. Sensor covers are intended for single use only.
Absent, damaged, perforated, or soiled sensor covers
can lead to inaccurate temperature readings.
2. The sensor tip must be kept clean, dry, and unda-
maged at all times to ensure accurate readings. The
accuracy of temperature readings can be affected by
damage to the probe window, or the presence of dirt
and ear wax on the probe window.
3. Fingerprints, earwax, dust and other soiling com-
pounds reduce transparency of the sensor tip and re-
sult in lower temperature readings. If the thermometer
is accidentally placed in the ear without a sensor cover
installed, the tip must be cleaned immediately.
4. The sensor tip is the most delicate part of the thermo-
meter. To safely clean the tip, gently wipe its surface with
a cotton swab slightly moistened with isopropyl alcohol
and immediately wipe dry with a clean cotton swab. Af-
ter cleaning, allow at least 5 minutes drying time before
measuring temperatures.
Note: Do not use any chemical other than isopropyl al-
cohol to clean the sensor tip.
5. Use a soft, dry cloth to clean the thermometer display
and exterior.
6. The thermometer is not waterproof. Do not put the
device in water when cleaning.
7. Store thermometer and sensor cover in a dry place,
free from dust and contamination and away from direct
sunlight.
8. Periodic cleaning and disinfection of the device fol-
lowing use are essential to prevent patient cross infec-
tion.
-Use a soft cloth slightly moistened with a 70% isopropyl
alcohol solution to disinfect the thermometer and sen-
sor. Do not use abrasive cleaners.
9. Ensure that children do not use the device unsuper-
vised; some parts are small enough to be swallowed.
10. Strong electromagnetic fields may interfere with the
proper operation of the thermometer.
Summary of Contents for 2018-132
Page 3: ...3 ...
Page 4: ...IT 4 ...