EN / CZone® Contact 6 PLUS User & Installation Manual
8
MOUNTING
1. Mount the Contact 6 PLUS on a vertical surface with the cables exiting downwards.
2. Allow enough space below cable grommet for wiring bend radius.
o
Note - Cable radius determined by wiring manufacturer.
3. Fasten the Contact 6 PLUS by using 4 x 8G or 10G (4mm or 5mm) self-tapping screws or bolts (not supplied).
IMPORTANT
-
The Contact 6 PLUS must be mounted within 30 degrees from the vertical position to ensure
water correctly runs away from the product if mounted in a location where water can contact the product.
