11
INSTRUCTION MANUAL
ATTACHMENTS (1, 2, 3)
Dough hook (1)
Use the hook (1) for kneading yeasted dough, mixing minced meat etc.
Mix dry ingredients for the dough at the speed «1-2», when kneading dough, increase or decrease
the attachment’s (1) rotation speed with the operation mode switch (11).
Mixing attachment (2)
Use the attachment (2), for instance, for making potato mash. Recommended speed operation
modes are 1-4.
Beater (3)
Use the beater (3) for beating cream and egg white, making puddings, cocktails, cream, mayonnaise,
sauces and for mixing liquid products. Recommended speed operation modes are 5-6.
Notes:
– Check if the attachment is installed correctly and make sure that it is fixed properly before the
operation.
– Do not block the ventilation openings on the motor unit (8) during the unit operation; this may
lead to the electric motor over-heating.
– Maximal continuous operation time of the kitchen machine is no more than 7 minutes. Make at
least a 30-35-minute break before switching the unit on again.
OPERATION OF THE DEVICE
–
Before installing the attachments, make sure that the operating mode switch (11) is in the "0"
position and that the power cord plug is not inserted into the electrical outlet.
–
Hold the motor unit (8) with your hand, press and hold the button (9), lift the motor unit (8) and
lock it in the upper position.
–
Place the bowl (5) in the installation position (7) and turn it clockwise until it stops.
–
Install the bowl cover (4) (Fig.1).
–
Place one of the attachments (1, 2 or 3) on the shaft (6), press the attachment slightly upwards
and turn the attachment counterclockwise until it stops. Make sure that the attachment is
securely fixed (Fig. 2).
–
Place the necessary ingredients in a bowl (5).
–
Press and hold the button (9) by pressing the upper part of the motor unit (8), set it to the working
position, release the button (9). Make sure that the motor unit (8) is securely locked in the
operating position.
Note:
there is a hole in the lid (4) for adding ingredients while the appliance is running.
–
Plug the power cord into the electric outlet.
