Power Off
Power On
Ignition Switch
Steering Lock
Key Access
Cover
Owner’s Manual
11
Power On/Off via Ignition
1. First, deactivate alarm system by following the steps above or by
pressing in on the ‘ignition switch’ (wait for two beeps to confirm
alarm system is deactivated).
2. To power on, turn ‘ignition switch’ clockwise to ‘power on’ position.
• Important:
If the key remote is not in the proximity field, the ignition
won’t turn.
Steering Lock
1. Turn ignition to ‘power off’ position.
2. Ensure the handlebars are turned to the full left position.
3. From the ‘power off’ position, push the ‘ignition switch’ in and rotate
anti-clockwise to the ‘steering lock’ position.
4. If the steering lock does not immediately engage, gently move the
handlebars a few degrees left to right while turning the key.
Disengaging Steering Lock
1. Handlebars will be in the full left position.
2. From the ‘steering lock’ position, push the ‘ignition switch’ in and
rotate key clockwise to the ‘power off’ position.
3. If the steering lock does not immediately disengage, gently move
the handlebars a few degrees left to right while turning the key.
Access Storage via Key Blade
1. To retrieve the ‘key blade’, press the ‘release button’ on the back of
the key remote and pull out the ‘key blade’ (see page 10).
2. Lift ‘key access cover’ to reveal key barrel.
3. Insert key and turn anti-clockwise to access the underseat storage
and/or battery compartments to charge/change the batteries (see
page 14).
Ignition
