Assembly and Initial Set-Up
LUBRICATION and MAINTENANCE
The moving parts in your Micra Stepper are all pre-lubricated
at assembly and should not require further attention. We strongly
recommend however, that the stepper is used inside and stored in a
dry condition. To clean the metal and plastic components, a general
household cleaner can be used, but please be sure to dry the stepper
and any attachments before use.
Note: - In the interest of safety, do NOT use polish or any lubricant on
the footplates.
LEVELLING THE STEPPER
Your Micra Stepper has a factory-welded frame and should not
need any adjustment. However in the interest of safety, please always
ensure that your Micra Stepper is positioned and used on a
solid flat surface. If necessary, use a rubber mat underneath to reduce
the possibility of slipping during use.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor