3. Cleaning the bean container
The bean container must be cleaned daily to remove any coffee oil residue, as it can have a negative
effect on the taste.
1. Close the bean container (2) by pushing in the sliding valve (3).
2. Grind the espresso beans that remain in the grinding mechanism until the grinder runs idle.
3. Use a slot screwdriver to release the locking screw from the bean container.
4. Take off the bean container from the grinder, remove it by lifting upwards.
5. Temporarily transfer the espresso beans into another container if necessary.
6. Clean the bean container inside and outside with a damp cloth and then dry it.
7. Remove any excess beans from the bean container intake.
8. Position the bean container on the bean container intake. When positioning the bean container
intake, ensure that the nose of the bean container is located in the corresponding recess in the bean
container intake.
9. Push the bean container down slightly into the bean container intake. If the bean container cannot
be fixed in place by rotating it, it may not be positioned correctly.
and try again to fix it in place by rota
ng it.
10. Use a slot screwdriver to tighten the locking screw for the bean container clockwise.
11. Pour the espresso beans back into the bean container.
12. Open the bean container by pulling out the sliding valve.
4. Cleaning the grinding mechanism
The manufacturer recommends using GRINDZ
™
or CAFETTO
™
cleaning products to be used every 2-5
days, that the grinder is working.
C. Troubleshooting
Problem
Cause
Remedy
The grinder is
not grinding;
the display
does not
light up.
The power
plug is not
plugged into a
socket.
The bean container
is not
inserted.
The thermal
overcurrent
circuit-breaker
has been
triggered.
Insert the power plug into a
properly
installed wall socket.
Insert the bean container.
Check whether the circuit-
breaker’s
release button has
popped out. Push it back in if
necessary. If the circuit breaker
repeatedly pops out, contact
your supplier.
Check the electric fuse. Return
it to its original state or replace