Bentone Bentoflex ST 133 K, Installation And Maintenance Instruction

Page: 3 / 40

3
Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data _______________________________________ 7
2.1 Dimensions ST 133 _______________________________ 7
2.2 Dimensions, flanges _______________________________ 8
2.3 Burner installation _________________________________ 8
2.5 Working field ST 133 K,KV _________________________ 9
2.4 Setting of brake plate and air flow ___________________ 9
2.6 Recommended nozzles and pressures ______________ 10
2.7 Nozzle table, 8-15 bar ____________________________ 10
2.8 Description ______________________________________ 11
3. General instructions _________________________________ 12
3.1 General instructions ______________________________ 12
3.2 Delivery inspection _______________________________ 13
3.3 Preparing for installation ___________________________ 13
3.4 Oil distribution ___________________________________ 13
3.5 Electrical connection ______________________________ 13
3.6 Burner installation ________________________________ 14
4. Basic settings ______________________________________ 15
4.1 Example of basic settings _________________________ 15
5. Burner servicing ____________________________________ 18
5.1 Servicing _______________________________________ 18
5.2 Servicing the combustion device ___________________ 18
5.3 Replacing the oil pump ___________________________ 19
5.4 Replacing the fan motor and fan wheel ______________ 20
5.5 Servicing the air intake and intake cone ______________ 21
5.6 Replacing the entire electrical package ______________ 21
5.7 Replacing individual electrical package components ___ 22
6. Instructions Pump __________________________________ 23
6.1 SUNTEC AS ____________________________________ 23
7. Oil burner control ___________________________________ 29
7.1 Wiring diagram _________________________________ 29
7.2 List of components _______________________________ 30
7.3 Colour codes LMO14/24 __________________________ 31
7.4 Fault codes LMO14/24 ___________________________ 31
8. Fault Location ______________________________________ 32
8.1 Burner will not start _______________________________ 32
8.2 Burner will not start after normal use ________________ 32
8.3 Delayed ignition __________________________________ 33
8.4 Noise in pump ___________________________________ 33
8.5 Pump pressure __________________________________ 33
9. Log of flue gas analysis ______________________________ 35
10. Oil burners maintenance instructions _______________ 36