Bentone B 70-3, Installation And Maintenance Instruction

Page: 3 / 56

3
Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data B 70-3 _________________________________ 7
2.1 Dimensions ______________________________________ 7
2.2 Working field B 70-3 _______________________________ 8
2.3 Setting of brake plate and air flow ___________________ 8
2.4 Nozzle selection __________________________________ 9
2.5 Setting of brake disc and air flow ____________________ 9
2.6 Burner installation _________________________________ 9
2.7 Recommended nozzle and pressure _________________ 9
2.8 Nozzle table. ____________________________________ 10
2.9 Description ______________________________________ 12
3. General instructions _________________________________ 13
3.1 General rules ____________________________________ 13
4. Installation _________________________________________ 14
4.1 Handling and lifting instruktion _____________________ 14
4.2 Acceptance inspection ____________________________ 15
4.3 Preparations for installation ________________________ 15
4.4 Distribution of oil _________________________________ 15
4.5 Electrical connection ______________________________ 15
4.6 Mount the burner on the boiler _____________________ 16
4.7 Check oil line seals _______________________________ 16
4.9 Example of basic settings _________________________ 17
4.8 Recommended surplus air ________________________ 17
4.10 Setting values for air damper B70 ___________________ 18
4.11
Setting values for insert B70 ___________________ 18
4.12 Insert control movable brake disc ___________________ 19
4.13 Air setting _______________________________________ 19
5. Burner servicing ____________________________________ 20
5.1 Servicing the combustion device ___________________ 20
5.2 Servicing air dampers ____________________________ 21
5.3 Replacement of damper motor, air __________________ 22
5.4 Replacing the oil pump ___________________________ 23
5.6 Replacement of electrical components ______________ 24
5.7 Vibration ________________________________________ 25
6. Instructions Pump RSA 95 & 125______________________ 26
6.1 Technical data ___________________________________ 26
6.2 Components ____________________________________ 26
6.3 Mounting/dismounting by-pass plug ________________ 26
6.4 Purging _________________________________________ 26
6.5 Replacing the filter _______________________________ 26
6.6 Function Danfoss RSA 95 - 125 ____________________ 27
6.7 Suction line tables ________________________________ 28
7. Electric equipment __________________________________ 29
7.1 Safety system __________________________________ 29
7.2 List of components _______________________________ 30
8. Control _____________________________________________ 31
8.1 Technical data ___________________________________ 31
8.2 LED indicator lamps ______________________________ 31
8.3 Explanation of the different sequence modes _________ 32
8.4 BurnerPro LED fault/lock code table ________________ 33
9. Fault Location ______________________________________ 36
9.1 Burner will not start _______________________________ 36
9.2 Burner will not start after normal use ________________ 36
9.3 Delayed ignition __________________________________ 37
9.4 Noise in pump ___________________________________ 37
9.5 Pump pressure __________________________________ 37
10. Log of flue gas analysis ____________________________ 38
11. Oil burners maintenance instructions _______________ 39
13. Preface __________________________________________ 41
12. JUMO dTRON 316 ________________________________ 41
14. Identifying the instrument version __________________ 42
15. Mounting _________________________________________ 43
15.1 Preparation _____________________________________ 43
15.2 Fitting in position, Type 703042/43/44 _______________ 43
15.3 Fitting in position, Type 703041 ____________________ 43
16. Electrical connection ______________________________ 44
16.1 Connection diagram for Type 703041 _______________ 44
16.2 Connection diagram for Type 703042/43/44 _________ 45
17. Displays and keys _________________________________ 46
18. Operation ________________________________________ 47
18.1 Level concept ___________________________________ 47
18.2 Level inhibit _____________________________________ 47
18.3 Entering times ___________________________________ 48
18.4 Operation of the fixed-setpoint controller _____________ 48
18.5 Operation of the program controller _________________ 49
18.6 Operator level „OPr“ _____________________________ 50
19. Parameter level „PArA“ ___________________________ 50
20. Configuration level „ConF“ ________________________ 51
20.1 Analog inputs “InP” _______________________________ 51
21. 9 Configuration level „ConF“ _______________________ 52
21.1 Controller „Cntr“ _________________________________ 52
21.2 Generator „Pro“ __________________________________ 52
21.3 Utgångar „OutP“ _________________________________ 53
21.4 Display „diSP“ ___________________________________ 53
22. Autotuning _______________________________________ 54
23. Alarms ___________________________________________ 54