3500 Galvanic Isolator Interface Manual
ii
Copyright © 1999 Bently Nevada Corporation
All Rights Reserved.
The information contained in this document is subject to change without notice.
The following are trademarks of Bently Nevada Corporation in the United States and other
countries:
Actionable Information™, Actionable Information to the
Right People at The Right Time™, ADRE®, Bently
Nevada®, CableLoc™, Data Manager®, Decision
Support™, DemoNet™, Dynamic Data Manager®,
Dynamic Transmitor™, Engineer Assist™,
FieldMonitor™, FluidLoc™, FlexiTIM™, FlexiTAM™,
Helping you Protect and Manage All Your Machinery®,
HydroVU™, Key
∅
®, Keyphasor®, Machine Condition
Manager™ 2000, MachineLibrary™, MicroPROX®,
Move Data, Not People™, Move Information, Not
Data™, Performance Manager™, PROXPAC®,
Proximitor®, REBAM®, Seismoprobe®, System 1™,
TDIXconnX™, Tecknowledgy™, TipLoc™,
TorXimitor®, Transient Data Manager®,
Trendmaster®, TrimLoc™
,
VAM™, Velomitor®,
Xlerometer™
The
Bently Nevada Corporation Orbit Design
is a
trademark of Bently Nevada Corporation in the United
States and other countries.
The following ways of contacting Bently Nevada Corporation are provided for those times
when you cannot contact your local Bently Nevada representative:
Mailing Address
1617 Water Street
Minden, NV 89423
USA
Telephone
1 775 782 3611
1 800 227 5514
Fax
1 775 782 9259
Internet