Step By Step Assembly Instructions
Page :
1
3
Step 9
9.
1:
Insert cross dowel (S) into the hole on top of each leg (27) as shown. Ensure the horizontal
marking on each cross dowel is facing out as shown.
9.2: Insert threaded bolt (R) into the hole on each leg (27). Tighten threaded bolt (R) into the
hole of cross dowel (S) that is already concealed in each leg (27) as shown.
9.3: Attach 2x leg (27) onto bottom panel (7) by inserting bolt (R) into the pre-drilled holes of metal
corner bracket as shown. Insert flat washer (V), lock washer (U) and hex nut (T) onto
threaded bolt (R) on leg (27) and in order as shown.
(T) followed by (U), (U) followed by (V). Tighten hex nut (T) using spanner (jj) as shown.
9.4: Lift up the bottom panel (7) of unit as shown.
9.5: Attach 2x leg (27) onto bottom panel (7) by inserting bolt (R) into the pre-drilled holes of metal
corner bracket as shown. Insert flat washer (V), lock washer (U) and hex nut (T) onto
threaded bolt (R) on leg (27) and in order as shown.
(T) followed by (U), (U) followed by (V). Tighten hex nut (T) using spanner (jj) as shown.
9.6:
With help of assistant, carefully stand the unit upright.
Fitting
T x 4
U x 4
V x 4
R x 4
S x 4
jj x 1
S
R
27
Step 9.
1
Step 9.2
27
T
U
V
jj
Step 9.5
7
27
27
27
27
T
U
V
jj
Step 9.3
Step 9.4
Step 9.6
IW-
1
7-480X-80-3-R
16
