Step By Step Assembly Instructions
Fitting
A x 8
Step
1
Page : 3
Assembly is complete
Step 1.1
A
A
Step 1.6
A
A
Step 1.5
St
ep
1.4
St
ep
1.4
1
Step 1.2
Step 1.3
2
2
2
1
.
1
: Insert 4x wood shelf supports (A) into the pre-drilled holes in left side panel and partition of top unit
(
1
) as shown.
1
.2 : Tilt adjustable shelves(2) to a suitable angle as show in picture so as to slide it in.
1
.3 : Slide adjustable shelves (2) into the unit. Ensure the holes on adjustable shelves (2) are facing down
then place them onto the pins of wood shelf supports (A) as shown.
1
.4 : Lift up right side of adjustable shelves (2) as shown.
1
.5 : Insert 4x wood shelf supports (A) into the pre-drilled holes in right side panel and partition of top unit
(
1
) as shown.
1
.6: Lower adjustable shelves (2) onto the pins of wood shelf supports (A) as shown.
2
Step 1.2
IW-
1
7-300X-20-
3
-R
2
