50 mm
22
16
50 mm
max.
600 mm
Clip mounting
Mounting possibilities
Mounting possibilities
Mount the clips 50 mm respectively from the end
of the headrail, and with a distance
of max. 600 mm.
Standard profile
Clip
Attention: It is recommended to mount the clip
with the flap forward (into the room). The clip can
only
be mounted with the flap toward the window
or the pane respectively, in case the distance to
the rail is
min. 7 mm
.
>7 mm
Recommendation: DIN 7982 Ø 3,9 x 13 mm
(for wooden and synthetic frames)
Clip
Place the profile in the back edge of the clip and push the front of
the profile upwards (till it clicks in).
When
dismounting
, push the flap of the clip upwards to be able to
take the profile out of the clip.
Recommendation: DIN 7981 Ø 3,9 x 16 mm
(for wooden and synthetic frames)
Ceiling mounting
with clip
Recommendation: DIN 7981 Ø 2,9 x 9,5 mm
(for wooden and synthetic frames)
!
1.
2.
Profile
“Click”
Flap
Wall installation
with mounting bracket and clip
Wall installation
with fixed or adjustable wall mount and clip
Installing the window moulding
with moulding locking strip and clip
All dimensions in millimetre!
Dismantle mounting bracket
Alternative mounting
Recommendation: DIN 7981 Ø 2,9 x 9,5 mm
(for wooden and synthetic frames)
Max. length of the screw = window moulding depth!
Recommendation: DIN 7982 Ø 3,9 x 13 mm
(for wooden and synthetic frames)
Let down the blind and mark the
position for the clamping shoe (always
the outer edge of the blind). Screw on
holding brackets, mounting bracket or
window moulding.
Pull out and extend the tension cord
bracket.
For
fixing plates
use mounting template (red)
see separate sheet.
1
2
Mounting bracket
Holding brackets
Window moulding
1
1
Anti-twist device
Tension cord bracket
2
Outer edge of the blind
Mounting of tension cord bracket (Typ P1650)
