Multiple Disconnect Safety System Installation and Operating Instructions
950-001568-000 Rev A
18
Chapter 3: Installation Procedure
Preparing to Install the MDSS
Refer to the project drawings to identify the mounting location and any specific
location requirements or special instructions. The MDSS must be mounted in a
position and at a location where the door is easily accessible.
Figure 5
Diagram of the required door swing
The mounting base must be at least as large as the enclosure to be mounted and
be able to support the weight of the equipment.
NOTES
When floor mounting the enclosure, it must be secured to a supporting
structure to prevent potential movement. The bottom skin may be drilled to
accommodate bolting to the floor.
Due to the option of removing the bottom gland plate, code may require any
exposed bottom substrate to be non-combustible.
